Tuesday, November 28, 2006

Troubleshooting a Stop 0x0000000A error in Windows XP

When Windows XP detects a problem from which it cannot recover, it displays Stop messages. These are text-mode error messages that report information about the condition.
Stop messages, sometimes referred to as blue screens (BSoD), contain specific information that can help you diagnose and possibly resolve the problem detected by the Windows kernel.


Stop 0x0000000A or IRQL_NOT_LESS_OR_EQUAL
The Stop 0xA message indicates that a kernel-mode process or driver attempted to access a memory location to which it did not have permission, or at a kernel interrupt request level (IRQL) that was too high. A kernel-mode process can access only other processes that have an IRQL lower than, or equal to, its own. This Stop message is typically due to faulty or incompatible hardware or software.
Possible Resolutions:
A Stop 0xA message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. Using updated software is especially important for multimedia apllications, antivirus scanners, and CD mastering tools.
A Stop 0xA message might also be due to failing or defective hardware. If a Stop message points to a category of devices (video or disk adapters, for example), try removing or replacing the hardware to determine if it is causing the problem.
If you encounter a Stop 0xA message while upgrading to Windows XPl, the problem might be due to an incompatible driver, system service, virus scanner, or backup. To avoid problems while upgrading, simplify your hardware configuration and remove all third-party device drivers and system services (including virus scanners) prior to running setup. After you have successfully installed Windows XP, contact the hardware manufacturer to obtain compatible updates.

Microsoft KB articles:

Troubleshooting a Stop 0x0000000A Error in Windows XP

STOP 0x0000000A Error Message When You Change from AC Power to DC Power
STOP 0x0000000A Error Message When You Fast Switch Between Users
STOP 0x0000000A Irql_Not_Less_or... During Windows XP Upgrade
STOP 0x0000000A "Fatal System Error" on HP5100C ScanJet
STOP 0x0000000A A Computer may Hang during heavy load with an Ericsson HIS Modem
STOP 0x0000000A Windows XP restarts when you try to shut down your computer
STOP 0x0000000A Computer automatically restarts after upgrade to XP

0 comments: